Conventional Systems Technical Manual - Alcad

MONITORS AND CONNECTION BRACKETS FORHOUSES AN FLATSCONNECTION BRACKET FOR HOUSES AND FLATSWALL-MOUNTED. PLACE AND POSITIONINGHEIGHTChoose a place to install the connection bracket where thewall is flat, even and hard.To avoid undesired effects in the visualisation of images(reflections, background light, etc.) and to preserve the workinglife of the equipment, choose a place that avoids directlight sources, intense heatBear in mind the dimensions of the monitor which will laterbe connected to the connection bracket and that the top part ofthe connection bracket is at a height of 1.6m from floor level(see illustration).224 mm193 mm197 mm15 mm 20 mm166 mmMonitor and connection bracket size1.6 mWALL-MOUNTED. FIXING THE CONNECTIONBRACKET TO THE WALLRemember to pass the cables through the cable openingbefore positioning the bracket.Fix the connection bracket to the wall with the screws andwall-plugs supplied with the product.Position the bracket vertically.Note: The use of the anchoring points in the four corners isrecommended.Make the connections and adjustments as indicated in thediagrams and connection and adjustment instructions of thismanual.INSTALLATION ON A STANDARD ELECTRICALBOX. PLACE AND POSITIONING HEIGHTBear in mind the dimensions of the monitor which will laterbe connected to the connections bracket (see illustration).To avoid undesired effects in the visualisation of images(reflections, background light, etc.) and to preserve the workinglife of the equipment, choose a place that avoids directlight sources, intense heatRemember to pass the cables through the cable openingbefore positioning the standard electrical box.Make sure that the standard electrical box is vertical and uniformlyaligned or flush with the wall. Place the box at a heightof 1.5 metres above floor level. The connection bracket willthen be at a height of 1.6 metres above the floor.224 mm193 mm197 mm15 mm 20 mm166 mmMonitor and connection bracket size1.5 m135