Conventional Systems Technical Manual - Alcad

DOOR OPENING USING EXTERNAL PUSHBUTTONUseWhen the entry door does not have a door handle, a pushbutton is required to activate the electric lock so that the door can beopened from the interior. The door can be opened while the electric lock is activated.It is advisable to install the pushbutton near the entry door in such a way that it is possible to open the door while pressing thepushbutton. If this is not possible, then an automatic electric lock, model ABR-003, can be installed. This lock remains active untilthe door is opened.DOOR ENTRY INSTALLATIONSDOOR ENTRY INSTALLATIONS. ELECTRONIC CALLINSTALLATIONS WITH AUDIO UNIT GRF-201WIRED DIAGRAM0.5 mm 2SECTION TABLEUp to 25 metresUp to 100 metresAWG0.8 mm 202 0.25 mm 0.6 mm 22GRF-201Made in Spain3 2 J2V~ 9 10 11 12 1 2 3 4 7Door-opening push-buttonMAN-410(1) Max. 12 Vac, 800 mAABR-001(1)273