Conventional Systems Technical Manual - Alcad

ARRIBAUPHAUTARRIBAUPHAUTARRIBAUPHAUTARRIBAUPHAUTARRIBAUPHAUTARRIBAUPHAUT243 mm372 mm15 mm15 mm15 mm114 mm114 mm 114 mm114 mm 114 mm114 mm15 mmWidthflush mounted boxEnlarge for eachset of separators2 flush-mounted boxes in parallel3 flush-mounted boxes in parallelSURFACE WALL-MOUNTED BOXESSurface wall-mounted boxes are used to fix the entrance panel or concierge unit panel in the desired place by installing the panelon the surface of the wall. They are used when the wall is made from a material that is difficult to work with, such as marble or granite.To install several surface wall-mounted boxes (for several panels in parallel), it is recommended that CSU-000 separators be used.Also available are angular models of surface wall-mounted boxes, which allow the entrance panel to be fixed at an angle. Theangular models are useful when the place of the installation of the entrance panel is difficult to access, for example, behind a fence,or when the video door entry system requires a better orientation of the video unit.SURFACE WALL-MOUNTED BOXESSINGLE SURFACE WALL-MOUNTEDBOXESB mm (función del modelo)128 mm40 mmSEPARATORS FOR SURFACE WALL-MOUNTED BOXESCod. 9740172 CSU-000SET OF SEPARATORS FOR SURFACE WALL-MOUNTED BOXESElements which permit the assembly of several surface wall-mounted boxes (excludingangular models), making it easy to fix the boxes in the desired place. One setof separators is required for each pair of surface wall-mounted boxes.ANGULAR WALL-MOUNTED BOXESSINGLE ANGULAR WALL-MOUNTED BOXES128 mmB mm (depending on the model)Selecting the surface wall-mounted box:The choice of surface wall-mounted box will be determined by the dimensions of the entrance panel to be installed.In the Chapter 3 “Entrance panels: dimensions and accessories”, you will find a table showing which model of surface wallmountedbox you should use with the panel.77