Conventional Systems Technical Manual - Alcad

“Monitors type 2”Return the fixing tongue (1) to its initial position. The monitoris once again ready to be fixed to the connections bracket.1ELECTRONIC ACCESSORIESCALL EXTENSION UNITSFIXING TO THE WALLMove the lower tab gently and remove the cover from thebase of the call extension unit.Break off the partitions so as to be able to pass the wiresthrough. There are two openings at the back (1) and two at thebottom (2).12Remember to pass the cables through the opening beforeattaching the call extension unit.Fix the base of the call extension unit to the wall using thescrews and wallplugs provided.Once the connections and adjustments have been made asindicated in the diagrams and connection and adjustment instructionsof this manual, replace the cover..139