Conventional Systems Technical Manual - Alcad

POSITIONING THE ENTRANCE PANELSPOSITIONING THE CONCIERGE UNIT PANELSPOSITIONING THE PANEL IN THE FLUSH-MOUNTED BOXPOSITIONING THE PANEL IN A FLUSH-MOUNTED BOX WITH RAIN-SHIELDPOSITIONING THE PANEL IN A FLUSH-MOUNTED BOX WITH COVER FRAMESome models of flush-mounted boxes have one or severalreinforcements, which are useful when the box is being fitted tothe wall. If this is the case, remove these reinforcements.Retirar en el momento deinstalar la placa de calleRemove when installing theentrance panelRetirer lors de l'installationde la plaque de rueRemove the protective plugs from the flush-mounted box. Thebox is now ready for the entrance panel to be fixed in it at alater stage.The flush-mounted box has a hinge or support axle on eachof its sides. Extract the two axles according to the direction inwhich you wish to open the entrance panel, i.e. from left toright or right to left or from top to bottom. The unused axlesshould be fully inserted in their appropriate slots.112