Conventional Systems Technical Manual - Alcad

LOWER ENTRANCE PANEL MODULES WITH CONFIGURABLE PUSHBUTTONSModules with configurable pushbuttons. The distribution of the pushbuttons is defined by the user in view of specific requirements of theinstallation. These modules are extremely useful when the distribution of dwellings within a building is not homogeneous. This irregular distributioncan be reflected on the entrance panel. Fitted with rubber strips for water-tightness and with rings for fitting inside the flush-mountedbox.Note: For information on how to order entrance panel modules with configurable pushbuttons, see the ALCAD website (www.alcad.net).B mm (depending on rows of pushbuttons)128 mmCod. 9660064MPD-900Configurable entrance panel module with from1 to 8 levels or rows of pushbuttons.Dimensions: Varies with the number of levels orrows of pushbuttons.Cod. 9660065MPD-901Configurable entrance panel module with from9 to 16 levels or rows of pushbuttons.Dimensions: Varies with the number of levels orrows of pushbuttons.12 mm128 mmCod. 9660016MKD-900Configurable entrance panel module with from1 to 4 levels or rows of pushbuttons and keypadfor access control.Dimensions Varies with the number of levels orrows of pushbuttons.From 1 to 2 rows of pushbuttons: 128 mm x164.5 mm x 12 mmFrom 3 to 4 rows of pushbuttons: 128 mm x212.5 mm x 12 mmB mm (depending on the configuration)1 2 34 5 67 8 9C 012 mm71