Conventional Systems Technical Manual - Alcad

1 2 34 5 67 8 9C 02 34 5 67 8 9C 0STANDARD ELECTRONIC DOOR ENTRY INSTALLATION IN BUILDING WITHINTERNAL COMMUNICATION BETWEEN THE TELEPHONES IN ONE OF THEDWELLINGSCONVENTIONAL SYSTEMStandard wiring diagram for electronic door entry system with electronic call in buildings with a single point of entry where thepossibility of internal communication is required between the telephones of one dwelling. Characteristics of the internal communication:electronic call and and internal communication channel, with complete confidentiality.RemarksAssigning a extension number to each telephoneA different extension number is assigned to each telephone with internal communication. (See in chapter 5 the adjustment instructionsof telephone for internal communication).SINGLE-WIRED DIAGRAM5TEL-001LAST FLOOR1551252TIN-001TIN-001TEL-001GROUND FLOORALA-040 (230 V )230 V V(1)22ABR-001(2)4+NMAN-410+MPD-004+CMO-004POINTOF ENTRY2230 V I2 I1GCI-001SECTION TABLE1 mm 2Up to 50 metresAWG1.1 mm 17Up to 25 metres0.5 mm 2 0.8 mm 20Up to 100 metres1 mm 2 1.1 mm 172 0.25 mm 0.6 mm 2221 0.25 mm 0.6 mm 2222 0.5 mm 0.8 mm 20(3) 32 0.75 mm 1.0 mm 1824 1 mm 1.1 mm 17(1) Use separate cable hose(2) Max. 12 Vac, 800 mA(3) Section according to the numberof telephones in the dwelling226