Conventional Systems Technical Manual - Alcad

INSTALLATION IN BUILDING WITH SEVERAL POINTS OF ENTRY. BUZZING CALLCONVENTIONAL 4+N SYSTEMStandard wiring diagram for door entry installations with buzzing call in buildings with several points of entry.RemarksDetermining the main entrance panelOne of the entrance panels must be configured as the main panel (audio unit with J1 jumper installed). The panels of the otherpoints of entry must be configured as secondary panels (remove the J1 jumper from audio units).SINGLE-WIRED DIAGRAM55SECTION TABLEAWGTUN-001LAST FLOORTUN-001Up to 50 metres1 mm 2 1.1 mm 17Up to 25 metres0.5 mm 20.8 mm 20Up to 100 metres5 5(3)12342 0.25 mm 0.6 mm 222 0.5 mm 0.8 mm 202 0.75 mm 1.0 mm 182 1 mm 1.1 mm 17TUN-001GROUND FLOORTUN-001(1) Use separate cable hose(2) Max. 12 Vac, 800 mA(3) Section according to the numberof telephones in the dwellingALA-040 (230 V )4+NALA-040 (230 V )230 V V(1)2POINT OFENTRY 12 MAN-430+AAL-001+MPD-004+CMO-0046+NMAN-430+AAL-001+MPD-004+CMO-004POINT OFENTRY 222(1)230 V V6+NNEXTPOINT OF ENTRY230 V VABR-001(2)ABR-001(2)210