Conventional Systems Technical Manual - Alcad

COVER FRAMES FOR MONITORSPLACE AND POSITIONING HEIGHTTo avoid undesired effects in the visualisation of images(reflections, etc.) and to preserve the working life of the equipment,choose a place that avoids sources of direct light or intenseheat, damp and steam.Bear in mind the dimensions of the monitor cover frame itself.Position the monitor cover frame in such a way that the top partof the connection bracket to be fixed at a later stage is at aheight of 1.6 metres above floor level (see illustration).A RIBAUPHAUT1.6 mFIXING THE COVER FRAME FOR MONITORS TOTHE WALLDrill the required holes in the frame and fix it to the wall inthe desired place. Position the frame vertically and in the directionindicated by the sticker.The frame is now ready to be fixed and connected to the connectionbracket.A RIBAUPHAUTDirection of frame positionARRIBAUPHAUTThe frame and the connections bracket can also be fixeddirectly to the wall without having to make any holes in theframe. Make sure you install the frame in the direction indicatedon the sticker.The joined frame/connections bracket are now ready for theconnections bracket to be connected.Direction of frame positionARRIBAUPHAUTA RIBAUPHAUT134