Conventional Systems Technical Manual - Alcad

Electronic door entry with concierge system installationsGRF-203cod. 9610029Audio unit (several points of entry)4,3,2,1 14,13 18,17Power supplyV~,J1Made in SpainJ212 V~V~ 9 10 11 12 13 14 151 2 3 4 7 16 17 1818174321413Audio unit(Concierge)43211413ConciergetelephoneElectric lockEntrance panel lampsCommon push-buttonsConnectionActivationConnectionConnectionFrom the dwelling9 10 11 12 13 14 151 2 3 4 7 16 17 189 10 11 12 13 14 151 2 3 4 7 16 17 189 10 11 12 13 14 151 2 3 4 7 16 17 18Using external pushbutton9 10 11 12 13 14 151 2 3 4 7 16 17 18ABR-001ADJUSTMENTDefinition of main panelIt is necessary to define the entrance panel with which telephonescommunicate when on standby. This panel will be themain panel of the system and must have the J1 jumper installed.Carry out the following steps:In standard installations, leave the J1 jumper installed.In installations with several points of entry, select the mainpanel and remove the J1 jumper from all the other entrancepanels.In installations in housing estates, define the main panel foreach building in the estate and remove the J1 jumpers from allthe other panels.J1GRF-104cod. 9610015Made in Spain19J112 V~V~ 9 10 11 12 13 14 15 1 2 3 4 7 16 17 18Main entrance panelJ1Jumper for the selection of the main panelGRF-104cod. 9610015Made in Spain19J112 V~V~ 9 10 11 12 13 14 15 1 2 3 4 7 16 17 18Other entrance panelsJ1148