M300 Owner's Manual-English - Lexicon

More documents

Recommendations

Info

300 V 3.0 Owner's ManualLexiconP307 CC:Dly->PchEA:609 Chorus EB:801 Mono ShiftThis preset combines a stereo chorus passing into a mono shift program. Go to Machine B Effect Edit and modify the GlidePitch (GLD) parameter. If you want to open the stereo chorus effect, reduce BMIX so that some of the Chorus program passesby the Mono Shift program. The LFO is set moderatly fast, to 2.14Hz, with a Triangle shape.MchA EA:609 Chorus This preset makes use of a small variation in the glide delay to modulate the sound. The glidemoves between 9.7ms and 11.8ms. Advancing the LFO to values near 1.50Hz to 2.0 Hz yields a nice chorusing effect. Thereare no other delay lines, but the output lines are channel-swapped such that the left input passes to the right output, and viceversa.(In a Dual Mono Setup, of course, this is inaudible.)MchB EB:801 Mono Shift Baseline mono shift program with no pitch shift. Go to the glide parameter (GLD) in Effect Editmode to select the amount of pitch shifting you want.P308 CC:Pch->*DlyEA:810 Vocal ShiftEB:603 *PingoPongoThis is a very interesting detuned left/right delay effect. The Soft knob parameter controls the timing of the bouncing delays.The stored value of the Soft knob parameter is 16.MchAMchBEA:810 Vocal Shift This preset combines a short delay line recirculating around a -7 cent pitch shifter.EB:603 *Pingo Pongo Ping Pong delays bouncing back and forth. The Soft knob controls the timing of the bounce.P309 CC:*Dly->CompEA:604 *3Voice Dly EB:901 EZ Comp 2:1The Soft knob controls the timing relationships of the delay settings in the Machine A effect. The Soft knob parameter is storedwith a value of 31.MchA EA:604 *3Voice Dlys Two taps (Delays 3 and 4 ) are set with delay ratios of 1:2, meaning that, when one is 200ms,the other is 400ms, or when one is 359, the other is 718ms. This relationship is patched to the Soft knob in Setup Select.MchB EB:901 EZ Comp 2:1 A nice preset to add to an overall mix. You may need to adjust the Threshold parameter tomake it work for the particular signal you’re feeding it. Release is set to gently fall away after 363ms.P310 CC:Comp->*DlyEA:901 EZ Comp 2:1EB:613*Wall SlapsThis effect places a soft compressor ahead of Machine B, which is running a delay program. The Soft knob value is set to20 when the setup is selected.MchA EA:901 EZ Comp 2:1 A “soft” preset to add to an overall mix. You may need to adjust the Threshold parameterto make it work for the particular signal you’re feeding it. Release is set to gently fall away after 363ms.MchBEB:613*Wall Slaps Walls tied to the Soft knob move outward. A small amount of diffusion to smear the attack.5-14
The PresetsP311 CC:Pch->CompEA:802 Guit Shift EB:901 EZ Comp 2:1This preset combines a guitar shift effect going into an “easy” compressor effect. The LFO controls the Glide Shift parameter(GLD) in Machine A. The LFO rate is set to 0.16Hz with a sine waveform.MchA EA:802 Guitar Shift This preset offers a heavy amount of micropitch shift (-21c), along with a small amount ofrecirculating predelay. Raunchy sounding on “beefy” guitars.MchB EB:901 EZ Comp 2:1 A nice preset to add to an overall mix. You may need to adjust the Threshold parameter tomake it work for the particular signal you’re feeding it. Release is set to gently fall away after 363ms. If you’re using this witha guitar, you might want to grab the SLP (slope) control and increase the value.P312 CC:*SurrVerbEA:720 Recital HallEB:010 *Small St. AdjMachine B (Small Stereo Adjust) has three Soft knob patches which control the spacial placement of the source audio —in this case, the output of the reverb effect. In a surround mixing environment, advancing the Soft knob parameter will placemore of the reverb into the surround channel — assuming the returns of the 300 are panned hard left and right at the console.MchAvoice.EA:720 Recital Hall This medium large (44.5M) space opens sound sources beautifully. Made for string pads andMchB EB:010 *Small St.Adj This preset is a cut down version of the larger Stereo Adjust program available in SingleSetups. This particular preset has the Soft knob patched to three parameters: Spatial EQ (SPEQ), Bass Left (BASL), andBass Right (BASR) boosts and cuts.P313 CC:*V3CompEA:010 *Small St Adj EB:901 EZ Comp 2:1This is a straight ahead stereo compressor setup. Use it in a mix insert point or pre-fade send.MchA EA:010 *Small St.Adj This preset is a cut down version of the larger Stereo Adjust program available in SingleSetups. This particular preset has the Soft knob patched to three parameters: Spatial EQ (SPEQ), Bass Left (BASL), andBass Right (BASR) boosts and cuts.MchB EB:901 EZ Comp 2:1 A soft and easy preset to add to an overall mix. You may need to adjust the Thresholdparameter to make it work for the particular signal you’re feeding it. Release is set to gently fall away after 363ms.P314 CC:V3ChamberEA:701 ChamberEB:001 PONS+DitherThis preset is a reverb ahead of the dither program. The reverb is essentially untouched as it passes through Machine B.Remember, the chamber algorithm is actually mono in, stereo out.MchA EA:701 Chamber A great general purpose reverb tail. Size is set to 28.1M (the largest value is 64M), so the densityis rather close in. As you adjust Size, Rt will also change. If you want to unlink this natural phoenomena, set LINK to Unlink(on Page Two).MchB EB:001PONS / Dither This preset has dither turned on and set to PONS (Psycoacoustically Optimized NoiseShaping), with level of 32. Experiments have shown this to be an optimum starting level of dither.5-15
Page 2 and 3:
Unpacking and InspectionAfter unpac
Page 4 and 5:
Contents, cont'd. 4. The Algorithms
Page 6 and 7:
Congratulations on your purchase of
Page 8 and 9:
Installing the 300Installing the300
Page 10 and 11:
Installing the 300The Rear PanelTim
Page 12 and 13:
Installing the 300CablesFor best pe
Page 14 and 15:
Installing the 300ConfigurationsCon
Page 16 and 17:
PUSHPUSHPUSHPUSHPUSHPUSHPUSHPUSHIns
Page 18 and 19:
PUSHPUSHPUSHPUSHInstalling the 300A
Page 20 and 21:
300 V 3.0 Owner's ManualLexiconTerm
Page 22 and 23:
300 V 3.0 Owner's ManualLexiconThe
Page 24 and 25:
300 V 3.0 Owner's ManualLexiconOver
Page 26 and 27:
300 V 3.0 Owner's ManualLexiconSETU
Page 28 and 29:
System Operation3System Operation3-
Page 30 and 31:
System OperationIf you wish to chan
Page 32 and 33:
System OperationNOTE: Most studio a
Page 34 and 35:
System OperationWhen working in a f
Page 36 and 37:
System OperationSetup Select mode a
Page 38 and 39:
System OperationTo enter Setup Sele
Page 40 and 41:
System OperationSetup Edit mode is
Page 42 and 43:
System OperationWhen you have made
Page 44 and 45:
System OperationPage FiveNaming the
Page 46 and 47:
System OperationHere again, turning
Page 48 and 49:
System OperationSoft knob patches a
Page 50 and 51:
System OperationThe MIDI Control pa
Page 52 and 53:
System OperationPage FiveSCMS ModeS
Page 54 and 55: System OperationSrc : SET Large Hal
Page 56 and 57: 300 V 3.0 Owner's ManualSingle Setu
Page 58 and 59: 300 V 3.0 Owner's ManualRandom Hall
Page 60 and 61: 300 V 3.0 Owner's ManualLexiconRand
Page 62 and 63: 300 V 3.0 Owner's ManualLexiconRand
Page 64 and 65: 300 V 3.0 Owner's ManualRLVL (Rever
Page 66 and 67: 300 V 3.0 Owner's ManualLexiconRich
Page 68 and 69: 300 V 3.0 Owner's ManualLexiconFBK1
Page 70 and 71: 300 V 3.0 Owner's ManualLexiconSter
Page 78 and 79: 300 V 3.0 Owner's ManualDual Delays
Page 80 and 81: 300 V 3.0 Owner's ManualLexiconSpli
Page 82 and 83: 300 V 3.0 Owner's ManualSPRD (Sprea
Page 84 and 85: 300 V 3.0 Owner's ManualLexiconDLYD
Page 86 and 87: 300 V 3.0 Owner's ManualCompressorP
Page 88 and 89: 300 V 3.0 Owner's ManualLexiconSmal
Page 90 and 91: 300 V 3.0 Owner's ManualLexiconin p
Page 92 and 93: 300 V 3.0 Owner's ManualThe Setup P
Page 94 and 95: 300 V 3.0 Owner's ManualLexiconSing
Page 96 and 97: 300 V 3.0 Owner's ManualSplit Setup
Page 98 and 99: 300 V 3.0 Owner's ManualLexiconP208
Page 110 and 111: 300 V 3.0 Owner's ManualSplit Setup
Page 112 and 113: 300 V 3.0 Owner's ManualLexiconEP #
Page 114 and 115: 300 V 3.0 Owner's ManualLexiconEP #
Page 116 and 117: 300 V 3.0 Owner's ManualLexiconEffe
Page 118 and 119: 300 V 3.0 Owner's ManualEffect Pres
Page 128 and 129: 300 V3.0 Owner's ManualLexiconUsing
Page 130 and 131: 300 V3.0 Owner's ManualSnapping eve
Page 132 and 133: 300 V3.0 Owner's ManualProgrammingP
Page 134 and 135: 300 V3.0 Owner's ManualThings to Co
Page 136 and 137: 300 Event List300 V3.0 Owner's Manu
Page 138 and 139: 300 V 3.0 Owner's ManualLexiconThe
Page 140 and 141: 300 V 3.0 Owner's ManualLexiconDyna
Page 142 and 143: 300 V 3.0 Owner's ManualReal-time M
Page 144 and 145: 300 V 3.0 Owner's ManualMIDI Dumps
Page 146 and 147: 300 V 3.0 Owner's ManualTroubleshoo
Page 148 and 149: MIDI Implementation Data9MIDI Imple
Page 150 and 151: Specifications10300 Specifications1
Page 152 and 153: SpecificationsAnalog Input to Analo
show all

M300 Owner's Manual-English - Lexicon

Create successful ePaper yourself

Delete template?

Save as template?