M300 Owner's Manual-English - Lexicon

More documents

Recommendations

Info

300 V 3.0 Owner's ManualLexiconThe 300 contains innovative MIDI features that exemplify Lexicon's commitmentto using the power of MIDI to provide new functions to our users. In the 300 mostof these functions fall into one of four categories:1. Real-time (Dynamic MIDI ® ) control of as many as ten of the 300's variableparameters simultaneously. Two Setup patches can run on the channelspecified for System changes, and each machine can have four patches ona user-designated channel.2. Automatic selection of a 300 effect via MIDI Program Change messages.3. Real-time effects automation using MIDI System Exclusive or Non-registeredparameters.4. Transfer of setups, effects, the Event List and corresponding MIDI table toa computer, other MIDI-compatible device, or to another 300.Each of these applications will be discussed in this chapter, but first, let's coversome typical installations.MIDI ConnectionsAll MIDI connections described in this chapter use the MIDI IN, OUT and THRUconnectors located on the rear panel of the 300. As with any MIDI connection,use only standard MIDI cables, and keep them as short as possible to avoidpossible data errors. Fifteen meters is generally accepted as the maximumlength that should be used to maintain data integrity.MIDI OutMIDI In7 8 9SETUP CONTROLSELECTBYPASSAMIDI48 kHz44.1 kHz32 kHzPAGEUPPAGEDOWN4 5 61 2 3MACH SETUPEDITSTORE EFFECTEDITBYPASSBLEVEL300 DIGITAL EFFECTS SYSTEM— 0ENTERVALUE MODEDITPOWER300 with keyboardMIDI InMIDI OutMIDI InMIDI Out7 8 9SETUP CONTROLSELECTBYPASSAMIDI48 kHz44.1 kHz32 kHzPAGEUPPAGEDOWN4 5 61 2 3MACH SETUPEDITSTORE EFFECTEDITBYPASSB300 with sequencer/computerLEVEL300 DIGITAL EFFECTS SYSTEM— 0ENTERVALUE MODEDITPOWER7-2
MIDI OperationMIDI OutMIDI InMIDI OutMIDI In7 8 9SETUP CONTROLSELECTBYPASSAMIDI48 kHz44.1 kHz32 kHzPAGEUPPAGEDOWN4 5 61 2 3MACH SETUPEDITSTORE EFFECTEDITBYPASSBLEVEL300 DIGITAL EFFECTS SYSTEM— 0ENTERVALUE MODEDITPOWER300 with sequencer/computerand keyboardThe 300 can receive MIDI information on two independent channels: one forSysEx and Dump messages, and one for Program Change and Dynamic MIDI ®patches. MIDI Channel assignments are made in Control mode. To select thisfunction, press CONTROL and use the PAGE UP/DOWN keys to display theMIDI control page.Setting MIDI ChannelsMidi Mode AUTO CHNLMap Table:EDIT DUMPPressing the button above "CHNL" will cause the following display to appear:Channels:Sys- (1-16, OMNI)MachA-(1-16, OMNI)MachB- (1-16, OMNI)Press either of the left hand buttons in the lower row to select the MIDI Channelfor SysEx system and effect changes. Setup patch channel assignments arealso set here. Press either of the right hand buttons in the Upper row to selectthe MIDI Channel for Dynamic MIDI ® parameter changes for Machine A. Presseither of the righthand buttons in the lower row for Machine B. (All selectionsmay, of course, be set to the same channel.)7-3
Page 2 and 3:
Unpacking and InspectionAfter unpac
Page 4 and 5:
Contents, cont'd. 4. The Algorithms
Page 6 and 7:
Congratulations on your purchase of
Page 8 and 9:
Installing the 300Installing the300
Page 10 and 11:
Installing the 300The Rear PanelTim
Page 12 and 13:
Installing the 300CablesFor best pe
Page 14 and 15:
Installing the 300ConfigurationsCon
Page 16 and 17:
PUSHPUSHPUSHPUSHPUSHPUSHPUSHPUSHIns
Page 18 and 19:
PUSHPUSHPUSHPUSHInstalling the 300A
Page 20 and 21:
300 V 3.0 Owner's ManualLexiconTerm
Page 22 and 23:
300 V 3.0 Owner's ManualLexiconThe
Page 24 and 25:
300 V 3.0 Owner's ManualLexiconOver
Page 26 and 27:
300 V 3.0 Owner's ManualLexiconSETU
Page 28 and 29:
System Operation3System Operation3-
Page 30 and 31:
System OperationIf you wish to chan
Page 32 and 33:
System OperationNOTE: Most studio a
Page 34 and 35:
System OperationWhen working in a f
Page 36 and 37:
System OperationSetup Select mode a
Page 38 and 39:
System OperationTo enter Setup Sele
Page 40 and 41:
System OperationSetup Edit mode is
Page 42 and 43:
System OperationWhen you have made
Page 44 and 45:
System OperationPage FiveNaming the
Page 46 and 47:
System OperationHere again, turning
Page 48 and 49:
System OperationSoft knob patches a
Page 50 and 51:
System OperationThe MIDI Control pa
Page 52 and 53:
System OperationPage FiveSCMS ModeS
Page 54 and 55:
System OperationSrc : SET Large Hal
Page 56 and 57:
300 V 3.0 Owner's ManualSingle Setu
Page 58 and 59:
300 V 3.0 Owner's ManualRandom Hall
Page 60 and 61:
300 V 3.0 Owner's ManualLexiconRand
Page 62 and 63:
300 V 3.0 Owner's ManualLexiconRand
Page 64 and 65:
300 V 3.0 Owner's ManualRLVL (Rever
Page 66 and 67:
300 V 3.0 Owner's ManualLexiconRich
Page 68 and 69:
300 V 3.0 Owner's ManualLexiconFBK1
Page 70 and 71:
300 V 3.0 Owner's ManualLexiconSter
Page 72 and 73:
Page 74 and 75:
Page 76 and 77:
Page 78 and 79:
300 V 3.0 Owner's ManualDual Delays
Page 80 and 81:
300 V 3.0 Owner's ManualLexiconSpli
Page 82 and 83:
300 V 3.0 Owner's ManualSPRD (Sprea
Page 84 and 85:
300 V 3.0 Owner's ManualLexiconDLYD
Page 86 and 87:
300 V 3.0 Owner's ManualCompressorP
Page 88 and 89: 300 V 3.0 Owner's ManualLexiconSmal
Page 90 and 91: 300 V 3.0 Owner's ManualLexiconin p
Page 92 and 93: 300 V 3.0 Owner's ManualThe Setup P
Page 94 and 95: 300 V 3.0 Owner's ManualLexiconSing
Page 96 and 97: 300 V 3.0 Owner's ManualSplit Setup
Page 98 and 99: 300 V 3.0 Owner's ManualLexiconP208
Page 110 and 111: 300 V 3.0 Owner's ManualSplit Setup
Page 112 and 113: 300 V 3.0 Owner's ManualLexiconEP #
Page 114 and 115: 300 V 3.0 Owner's ManualLexiconEP #
Page 116 and 117: 300 V 3.0 Owner's ManualLexiconEffe
Page 118 and 119: 300 V 3.0 Owner's ManualEffect Pres
Page 128 and 129: 300 V3.0 Owner's ManualLexiconUsing
Page 130 and 131: 300 V3.0 Owner's ManualSnapping eve
Page 132 and 133: 300 V3.0 Owner's ManualProgrammingP
Page 134 and 135: 300 V3.0 Owner's ManualThings to Co
Page 136 and 137: 300 Event List300 V3.0 Owner's Manu
Page 140 and 141: 300 V 3.0 Owner's ManualLexiconDyna
Page 142 and 143: 300 V 3.0 Owner's ManualReal-time M
Page 144 and 145: 300 V 3.0 Owner's ManualMIDI Dumps
Page 146 and 147: 300 V 3.0 Owner's ManualTroubleshoo
Page 148 and 149: MIDI Implementation Data9MIDI Imple
Page 150 and 151: Specifications10300 Specifications1
Page 152 and 153: SpecificationsAnalog Input to Analo
show all

M300 Owner's Manual-English - Lexicon

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?