M300 Owner's Manual-English - Lexicon

System OverviewThe 300 front panel has been designed for ease-of-use and intuitive access toall of the 300's functions.Overview ofFront Panel ControlsIn general the user will be operating in one of the following modes of operation,each of which is accessed from the dedicated keypad on the front panel. Eachmode key has an LED which lights when the key is activated. The functions ofthe VALUE and STORE keys are discussed later in this section.SETUP SELECTIt is from Setup Select mode that setups are selected and loaded. Setups canbe selected with the Soft knob, or by entering a setup number on the numerickeypad and then pressing ENTER.CONTROLControl mode provides access to global system functions which include: DigitalI/O Configuration, MIDI Channels, Modes, and Effect Change tables. SelectingControl mode does not interrupt the audio operation of the 300.SETUPSELECTMACHSTOREVALUECONTROLSETUPEDITEFFECTEDITMODEDITMACHThis button allows you to toggle between the 300's two DSP engines. Eachmachine can process audio continuously and simultaneously. However, thefront panel can only actively control one effect at a time.Each time you pressMACH, the 300 switches control; the display indicates whether Machine A or Bis being controlled.SETUP EDITThis mode is used to modify the current setup. In this mode you can select theeffect for the setup, and the name assigned to the setupEFFECT EDITIn this mode you can modify the effect used in the current setup, and change thename of the effect. The available parameters for each effect are organized ontodisplay pages. The algorithms and their parameters are discussed in detail inChapter 4.MOD EDITIn Modulation Edit you can assign MIDI and Soft knob patches.Switching between these various modes is as simple as pressing a button. Theoperation of the 300 in each of these modes is discussed in the followingsections.2-5