M300 Owner's Manual-English - Lexicon

300 V 3.0 Owner's ManualLexiconThe 300 contains innovative MIDI features that exemplify Lexicon's commitmentto using the power of MIDI to provide new functions to our users. In the 300 mostof these functions fall into one of four categories:1. Real-time (Dynamic MIDI ® ) control of as many as ten of the 300's variableparameters simultaneously. Two Setup patches can run on the channelspecified for System changes, and each machine can have four patches ona user-designated channel.2. Automatic selection of a 300 effect via MIDI Program Change messages.3. Real-time effects automation using MIDI System Exclusive or Non-registeredparameters.4. Transfer of setups, effects, the Event List and corresponding MIDI table toa computer, other MIDI-compatible device, or to another 300.Each of these applications will be discussed in this chapter, but first, let's coversome typical installations.MIDI ConnectionsAll MIDI connections described in this chapter use the MIDI IN, OUT and THRUconnectors located on the rear panel of the 300. As with any MIDI connection,use only standard MIDI cables, and keep them as short as possible to avoidpossible data errors. Fifteen meters is generally accepted as the maximumlength that should be used to maintain data integrity.MIDI OutMIDI In7 8 9SETUP CONTROLSELECTBYPASSAMIDI48 kHz44.1 kHz32 kHzPAGEUPPAGEDOWN4 5 61 2 3MACH SETUPEDITSTORE EFFECTEDITBYPASSBLEVEL300 DIGITAL EFFECTS SYSTEM— 0ENTERVALUE MODEDITPOWER300 with keyboardMIDI InMIDI OutMIDI InMIDI Out7 8 9SETUP CONTROLSELECTBYPASSAMIDI48 kHz44.1 kHz32 kHzPAGEUPPAGEDOWN4 5 61 2 3MACH SETUPEDITSTORE EFFECTEDITBYPASSB300 with sequencer/computerLEVEL300 DIGITAL EFFECTS SYSTEM— 0ENTERVALUE MODEDITPOWER7-2