12.07.2015 Views

M300 Owner's Manual-English - Lexicon

M300 Owner's Manual-English - Lexicon

M300 Owner's Manual-English - Lexicon

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

System OperationPage FiveSCMS ModeSCMS Inp:SCMS Out:XXMULT-COPYThis page provides control over the SCMS (Serial Copy Management System)bits embedded in certain digital audio formats. The upper line of this pagedescribes the SCMS status of your input source.Either of the two right buttons on the botton allow Soft knob selection of theSCMS setting which will be output by the 300. The choices are: NO COPY, ONECOPY and MULT-COPY.Page SixEmphasisEmph Inp: D>N A>NEmph Out: D>N A>NThe top line (I) displays the input status of the incoming digital audio signal. (*****if none detected). The bottom line (O) shows your selections for the output datastream.The soft buttons act as toggle switches for the selections on this page. The Softknob can also be used to alter selected items."D>N" on the top line shows the Incoming pre-emphasis bit status (in thisexample "N"). Pressing the key directly below "D>N" sets the bit's outgoingstatus, Y(on) or N(off).The rightmost buttons on both the top and bottom row select analog pre- and deemphasis.The choices are: Y (on) or N (off). Control of emphasis/de-emphasislinks the input and output, i.e. you can select both or neither.3-25

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!