M300 Owner's Manual-English - Lexicon

300 V 3.0 Owner's ManualUsing the Softknob as aParameter ControllerLexiconThe front panel Soft knob is primarily used to adjust different parameter values.This Soft knob can also be programmed (in Mod Edit mode) as a multi-parametercontroller linking one or more parameters within Setups and Effects. The controlportion of the Soft knob parameter is part of the Setup, and is set in Setup Selectmode. The PAGE UP and PAGE DOWN keys enable you to utilize the Soft knobas a parameter controller.Example:Setup Preset DM 223 *Delay Daze contains two effect presets (*3Voice Dlys and*Pingo Pongo), each of which has delay parameters mapped to the Soft knob.Load *Dly Daze, then press PAGE UP. The screen should display:SoftknobA: 17DLY3 DLY4 Dst3 Dst4orSoftknobB: 17DLY1 DLY2 RDLY Dst4SoftknobA is the Soft knob value for Machine ASoftknobB is the Soft knob value for Machine BSoftknobS is the Soft knob value for Setup ParametersNote the current Soft knob value (this particular Setup has a preset value of 17),and the labels for the effect parameters linked to the knob (DLY3 and DLY4 forSoft knob A; DLY1, DLY2 and RDLY for Soft knob B).Press VALUE to display the values of these effect parameters. Remember thatthe display can only show one Machine’s effect at a time, to view parameters inthe other Machine which might be linked to the Soft knob, press MACH.Leave the display in the value mode while turning the Soft knob on the frontpanel, and you will see the displayed values change. The Soft knob parameterhas a range of 127 steps.3-12