M300 Owner's Manual-English - Lexicon

300 V 3.0 Owner's ManualLexiconStereo Pitch Shift Mode, Pitch and Effects PageMODEMODE selects stereo or mono mode. In stereo the two channels are linked, pitchshifting by the same amount and splicing at the same time.GLDL and GLDR(Glide Stereo Leftand Right)GLDL affects both channels in stereo mode, and the left channel in mono mode.GLDR affects the right channel in mono mode. These controls change the pitchcontinuously over a range of -2octaves to +1 octave. This allows a glissando tobe performed, either manually or via MIDI.PCHL (Pitch IntervalStereo Left) andPCHR (Pitch Interval R)PCHL adjusts the pitch interval of both channels in stereo mode, and the leftchannel in mono mode. The exact tuning can be altered by the fine pitch control,and the exact pitch shift in intervals and cents is displayed. The fine control mustbe set to the exact middle of its range if perfect pitch intervals are to be obtained.In the long display, the Fine Pitch is shown by the number of cents added to, orsubtracted from, the semitone intervals. Remember that Pitch Interval willproduce exact intervals only if Fine Pitch is centered. The rightmost character inthe long display is an asterisk (*) if Fine Pitch is centered, and a '+' or '-' otherwise.When the VALUE key turns on the short value display, Fine Pitch is not shownin cents, but as a number ranging from -32 to +32 in order to give a clearindication of how much Pitch Interval has been changed. When '**' is shown, FinePitch is centered and inactive. As a rule, 1 count of Fine Pitch is worth 2 centsnear 200%, 3 cents near 100%, 6 cents near 50%, and 12 cents near 25%.PCHR performs the same functions as the PCHL control, except that it is onlyactive in Mono mode, in which it adjusts the right channel.FINL (Fine PitchStereo Left) andFINR (Fine Pitch R)FINL acts on both channels together in stereo mode, and the left channel in monomode. It adjusts pitch continuously over a range of a few hundred cents, and isadditive to the PCHL control. If PCHL is set to the middle of its range the FINLcontrol can be used to set very small values of pitch shift, producing a chorusingeffect.FINR performs the same functions as the FINL control, except that it is onlyactive in Mono mode, in which it adjusts the right channel.4-16