M300 Owner's Manual-English - Lexicon

System OperationSrc : SET Large HallDst: R # _ _ AvailableSelect "Src" and use the Soft knob to designate a setup number (or the currentsetup) to be copied; select "Dst" and use the Soft knob to specify the registernumber where you want this copy stored. When you have made these selections,press STORE.Selecting "EFX" will cause a similar page to appear which allows you to copy theeffect and the patches used in any effect to any other register.Selecting "MIDI" allows you to copy patches from one effect to another.The Purge page allows you to delete all setup or effect registers, the MIDIProgram Change Map Table, or the Time Code Event List. It also allowsreinitialization of a Lexicon demonstration (erasing all user effects and TimeCode Event List data), and a complete reinitialization of the system to its factoryconfiguration.Selecting "FACTORY" restores the 300 to its factory memoryconfiguration. This selection will destroy all user modificationsof the original factory configurations.Page NinePurge ToolsPurge Tools:FACTORYSETUP EFX MIDI TCODESelect "SETUP" to clear allsetup registers.Select "EFX" to clear all effectregisters.Select "TCODE" to clearthe Time Code Event List.Select "MIDI" to clear theMIDI Program ChangeMap Table.Pressing any of the active buttons to select one of these options will cause thedisplay of a warning prompt. When this prompt appears, press STORE toexecute the function.Be careful! These functions permanently erase user information.3-27