M300 Owner's Manual-English - Lexicon

300 V3.0 Owner's ManualProgrammingParameter GlidesLexiconParameter glides can be a verypoweful feature. When you select a parameterglide (PA,PB, or PS) as type of automation change, the display will update anddisplay three entries; Parameter Selection (RTIM, PDLY, DLY1,FBK1...), finalparameter value (12.5s, 125m, 225m, 45%...), and the frame duration (25Fr) ofthe glide. The keys beneath each display entry allow you to select the functionfor Soft knob programming of the parameter glides.All parameter glides are based on the current Setup and effect which loaded.Example:Let’s say at the end of a scene, we want the Reverb Time to increase from itspreset value to 15 seconds. We want this glide to take 100 frames. At the sametime, we want the Input parameter to glide from its Setup value to OFF over thesame amount of time.Suppose the current Setup and Effect is Dance Hall, then all of the parametersin the Setup and effect can Be glided.The Event List up to the glide might look something like this:Edit #01 00 : 59 : 27 : 00S: Large HallEdit #02 01 : 00 : 15 : 00S: Dance HallEdit #03 01 : 00 : 21 : 07**: New EventYou will need to make a copy of event 03 (because you want 2 parameter glides)into the list, then edit both entries.6-6