12.07.2015 Views

FELCOM 250 FELCOM 500

FELCOM 250 FELCOM 500

FELCOM 250 FELCOM 500

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

6. WEB FUNCTIONSItemDescriptionPingDST. addressExecute buttonEnter the recipient address (ASCII only: max. 256 characters).Execute the ping command. The results appear in thetext area below. Every time a ping is performed the resultsupdate in the text area.NSlookupDST. addressExecute buttonEnter the recipient address. (ASCII only: max 256 characters).Execute Nslookup command. The results appear in thetext area below. Every time a command is performed,the results are updated.6.1.8 How to change the SMS passwordDo the following procedure to change the SMS password. Make sure to write downand not forget the password. If the password is lost, contact the dealer or retail supplier.If this occurs, <strong>FELCOM</strong> <strong>250</strong>/<strong>500</strong> must be reset to factory settings (refer to section7.7.2).1. Click [Settings] in the menu bar.2. Click [SMS server setting]. The following SMS server setting screen appears.3. Enter the current SMS password in the [Current password] field. Characters aredisplayed as black circles.4. Enter the new password in the [New password] field (Maximum 8 characters).5. Enter the new password again in the [Confirm new password] field.6. Click the [Apply] button. The message "Setting completed" appears.Note: The following error messages can occur:• Current Password isn’t correct: The current password was entered incorrectly.6-22

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!