FELCOM 250 FELCOM 500

5. WEB SOFTWARE3. Click the [Connect] button of the service to use. When connecting, the message"Now connecting..." displays. When connected, the message "***connection success."appears.Note 1: If connection fails, the message "***connection failure." displays.Note 2: If the internet password is enabled in section 6.1.5, it is required to enterpassword. Proceed to step 4.4. Enter the Internet password and click the [OK] button.Example: Internet Explorer (Windows Vista)5. Click the [OK] button to close the message.6. To use multiple data services, repeat steps 3 - 5.Note: It is not possible to use the same application that is already connected. Disconnectthe service, and reconnect.When connected to the internet, the connection list is displayed as shown:P MarkConnectedConnectedExample: Standard IP packet, 32 kbps streaming IP packet communications• The first service has a P mark, and "---" appears in the [Application] field. In theabove connection list, Standard IP Packet Data Connection Service is connectedfirst.• In the [Status] field, "Not connected" changes to "Connected" (displays ingreen).• The [Operation] field "Connect" button changes to "Disconnect".7. Open the desired application software and begin data communication.Applications are not limited to only those marked with the P mark (applicationspreset at section 6.1.5.) You can use any software that appears after the 2nd applicationin the list. For example, in the connection list above, Windows MediaPlayer 32 kbps streaming IP packet communication is shown. All other applicationscan be used except Windows Media Player.How to disconnect from the internetDo the following to disconnect from the internet:1. Click [Main] in the menu bar.2. Click [Data connection]. The [Data connection] screen is displayed.3. Click [Disconnect] for the services to disconnect. When disconnecting, the message"Now disconnecting..." is displayed. When disconnected, the message"***disconnection success." is displayed. (***: Service and application)Note 1: If you disconnect a service marked with a P mark, all other connected serviceswill disconnect.5-17