FELCOM 250 FELCOM 500

6. WEB FUNCTIONS• New Password isn’t corresponding: The [New password] and [Confirm newpassword] fields are not the same.7. Click the [OK] button.6.1.9 How to change the administrator passwordDo the following to change the Administrator password (needed when login as Administrator.).Make sure to write down and not forget the password. If the password is lost,contact the dealer or retail supplier. If this occurs, FELCOM 250/500 must be reset tofactory settings (refer to section 7.7.2).1. Click [Settings] in the menu bar.2. Click [Change password]. The following Administrator password setting screenappears.3. Enter the new password in the [New password] field (4 - 8 characters). The charactersare displayed as black circles.4. Enter the new password again in the [Confirm new password] field.5. Click the [Apply] button. The message "Setting completed" appears.Note: The following error messages can occur:• New Password isn’t corresponding: The [New password] and [Confirm newpassword] fields are not the same.6. Click the [OK] button.6.2 Device ListAll devices connected to the same network can be displayed. All devices auto detectedon the handset also be changed with the Web software.6.2.1 How to detect devices automatically1. Click [Device] in the menu bar.6-23