VFD-F (CURVE).cdr

Group 8 Special Parameters (Twice the value for 460V class)Parameters Functions SettingsFactorySetting08-00 DC Brake Current Level 00~100% 0008-01 DC Brake Time during Start-up 0.0~60.0 Sec 0.008-02 DC Brake Time during Stopping 0.00~60.00 Sec 0.008-03 Start-point for DC Brake 0.00~120.00 Hz 0.0008-04 Momentary Power LossOperation Selection00: Disable0001: Trace from top downward02: Trace from bottomupward0.1~5.0 Sec 2.008-05 Maximum Allowable PowerLoss Time08-06 Speed Search Time 0.1~5.0 Sec 0.508-07 Maximum Speed Search 30~150% 110Current08-08 BB speed search method 00: Trace from top downward 0001: Trace from bottomupward08-09 Auto Restart Times after Fault 00~10 0008-10 Auto Restart Time after Fault 00 to 60000 sec 60008-11 Operation Frequency Inhibition 0.00~120.00 Hz 0.001 UP08-12 Operation Frequency Inhibition 0.00~120.00 Hz 0.001 DOWN08-13 Operation Frequency Inhibition 0.00~120.00 Hz 0.002 UP08-14 Operation Frequency Inhibition 0.00~120.00 Hz 0.002 DOWN08-15 Operation Frequency Inhibition 0.00~120.00 Hz 0.003 UP08-16 Operation Frequency Inhibition 0.00~120.00 Hz 0.003 DOWN08-17 Automatic Energy-saving 00: Energy-saving operation 00disabled01: Energy-saving operationenabled08-18 Automatic Voltage Regulation(AVR)00: AVR function enabled01: AVR function disabled02: AVR function disabled fordeceleration0008-19 Software Setting of the Brake 230V: 370~410VDCLevel460V: 740~820VDC(the action level of the brake 00:Disableresistor)380.0760.0 08-20 Vibration Compensation Factor 00~1000 00VFD-F SeriesCustomer8DELTA ELECTRONICS, INC. ALL RIGHTS RESERVED 8-15