VFD-F (CURVE).cdr

5.5 Group 4: Input Function ParametersVFD-F Series04 - 00 Multi-function Input terminal 1 Factory Setting: 0104 - 01 Multi-function Input terminal 2 Factory Setting: 0204 - 02 Multi-function Input terminal 3 Factory Setting: 0304 - 03 Multi-function Input terminal 4 Factory Setting: 0404 - 04 Multi-function Input terminal 5 Factory Setting: 0504 - 05 Multi-function Input terminal 6 Factory Setting: 0704 - 06 Multi-function Input terminal 7 Factory Setting: 0804 - 07 Multi-function Input terminal 8 Factory Setting: 09Settings 00~31Setting Functions Descriptions00 No function01 Multi-Speed terminal 102 Multi-Speed terminal 203 Multi-Speed terminal 304 Multi-Speed terminal 405 Reset (NO)06 Reset (NC)07 Jog operation (JOG)08 Accel/Decel disable09 Accel/Decel 2 selection10 Accel/Decel 3 selection11 B.B. (NO) input12 B.B. (NC) input13 Increase Frequency14 Decrease Frequency15 Emergency stop (NO)16 Emergency stop (NC)DELTA ELECTRONICS, INC. ALL RIGHTS RESERVED 5-19All unused terminals should be set to 00, toassure they have no effect on drive operation.Allows selection of the 15 multi-step speeds.Please refer to 05-00 to 05-14 to program the15 step speeds.Clears (Reset) a fault and returns the AC driveto normal operation.Enables the JOG command. Works identicalto the JOG key on the digital keypad.Stops the acceleration or deceleration of theAC drive. AC drive then maintains a constantspeed.A corresponding terminal set to value 09 andclosed selects Accel/Decel time 2. Acorresponding terminal set to value 10 andclosed selects Accel/Decel time 3.Accel/Decel time 4 is selected when bothterminals are closed.Enables the base block (pause) function.Please refer to Pr.08-08, for base blockfunctions.Enables the external terminals to increase ordecrease the Master Frequency commandeach time an input is received. Terminals arenot active during a stop command.Generates an external fault (EF1). Thefunction is identical to the external terminal(EF).5