VFD-F (CURVE).cdr

VFD-F Series5.8 Group 7: AC Drive and Motor Parameters07 - 00 Identity Code of AC Drive Factory Setting: ##Settings Display by model type This parameter displays the AC drive model code. This parameter is read-only.07 - 01 Rated Current of AC Drive Factory Setting: ##Settings Display by model type This parameter displays rated output current of the AC drive. The following chart may beused to look up the identity code, current, and hp of your drive.230V seriesKW 0.75 1.5 2.2 3.7 5.5 7.5 11 15 18.5 22 30 37HP 1 2 3 5 7.5 10 15 20 25 30 40 50Pr.07-00 4 6 8 10 12 14 16 18 20 22 24 26Rated current (A) 5 7 11 17 25 33 49 65 75 90 120 145Max. Carried Freq. 10KHz 9KHz 6KHzMin. Carried Freq. 4KHz 3KHz 2KHzFactory Setting 9KHz 6KHz 4KHz460V seriesKW 0.75 1.5 2.2 3.7 5.5 7.5 11 15 18.5 22 30 37 45 55 75 90 110 130 160 185 220HP 1.0 2.0 3.0 5.0 7.5 10 15 20 25 30 40 50 60 75 100 125 150 175 215 250 300Pr.07-00 05 07 09 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45Rated Current (A) 2.7 4.2 5.5 8.5 13 18 24 32 38 45 60 73 91 110 150 180 220 260 310 370 460Max. Carried Freq. 10KHz 9KHz 6KHzMin. Carried Freq. 4KHz 3KHz 2KHzFactory Setting 9KHz 6KHz 4KHz This parameter is read-only.07 - 02 Full-load Current of Motor Factory Setting: 100%Settings 30~120% Unit: 1 This parameter selects the full load current of the motor. Pr7-02 = (full load motor current / drive rated current) Example: If the rated current of AC drive is 150A, full-load current of motor is 120A, thenPr.7-02 should be set to 80%.5-36DELTA ELECTRONICS, INC. ALL RIGHTS RESERVED