VFD-F (CURVE).cdr

External relay specifications = 8A/250VAC or 5A/30VDC.VFD-F Series Relay delay time is 5~10 msec.03 - 08 Master Frequency Attained 1 Factory Setting: 0.0003 - 09 Master Frequency Attained 2Settings 0.00~120.00 Hz Unit: 0.01 An output relay may be programmed to activate when the output frequency exceeds thedesired attained frequency setting of these two parameters. There is a ± 2Hz window of operation. If the master frequency attained is 20Hz and theoutput frequency exceeds 20Hz, the corresponding output relay will be “closed”. When theoutput frequency is less than 18Hz, the corresponding output relay will be “opened” as thefollowing diagram shows.Master frequency2 attainedMaster frequency1 attainedMaster frequencyattainedFrequency2Hz2Hz2Hz4HzMasterfrequency 1FrequencycommandMasterfrequency 2TimeOutput frequency503 - 10 Analog Output 1, (AFM1) 0~10Vdc Factory Setting: 0003 - 11 Analog Output 2, (AFM2) 0/4~ 20mA Factory Setting: 01Settings 00: Output frequency01: Output current02: Output voltage03: Frequency command04: Power factor loading These parameters select the content of the analog output signals AFM1 and AFM2. Setting 00: 0-10V = 0 - (Pr.01-00) Setting 01: 0-10V = 0 - (2.52.0 x rated current) Setting 02: 0-10V = 0 - (Pr.01-02) Setting 03: 0-10V = 0 - Master Freq. commandDELTA ELECTRONICS, INC. ALL RIGHTS RESERVED 5-17