VFD-F (CURVE).cdr

4.2 KPF-CC014.2.1 Description of the Digital Keypad KPF-CC01VFD-F SeriesLCD DisplayIndicates frequency, voltage, current, userdefined units, read, and save etc.Model NumberStatus DisplayDisplay the driver'scurrent status.JOG Operation keyPress this key to executethe JOG frequency operation.Left keyMoves the cursor left.UP and DOWN keySet the parameter number andchanges the numerical data, suchas Master Frequency.FWD/REV Direction keySelect FWD/REV operationRUN keyStart AC drive operation.MODEChange between different display mode.Parameter Unit keySwitch the operation command source.Right keyMoves the cursor right.PROG/DATAUsed to enter programming parameters.STOP/RESETStops AC drive operation or reset the driveafter fault occurred.44.2.2 Explanation of Display MessageDisplay MessageDescriptionThe AC motor drive Master Frequency Command.The Actual Operation Frequency present at terminals U, V, W.The output current present at terminals U, V, W.The specified group description.The specified parameter description and settingCopy Mode: Press MODE key for about 2~3 seconds in mainpage. Use UP/DOWN key to select copy function (Read, Write,Delete) and LEFT/RIGHT key to select memory address. Totaltwo blocks are available.DELTA ELECTRONICS, INC. ALL RIGHTS RESERVED 4-5