WebSphere MQ Resources

More documents

Recommendations

Info

WebSphere MQ Configuration Considerations13. TCP Port for Listener Object. For WebSphere MQ v6 or later, alter the Listener object viarunmqsc to reflect the TCP port in use. Use the following command to change the TCP portof the default Listener:su - MQUSERrunmqscalter LISTENER(SYSTEM.DEFAULT.LISTENER.TCP) TRPTYPE(TCP) PORT(1414)IPADDR(192.168.1.100)Note: You must alter the Listener object even if you are using the default MQ listener TCPport 1414 but you do not need to set a specific IP address (IPADDR). If you skip theIPADDR setting, the Listener will bind to all interfaces on the server. If you do set IPADDR,it is strongly recommended that a virtual IP resource be created in LifeKeeper using theIPADDR defined address. This ensures the IP address is available when the MQ listener isstarted.14. TCP Port Number. Each WebSphere MQ listener must use a different port (default 1414) orbind to a different virtual IP, with no listener binding to all interfaces. This includes protectedand unprotected queue managers within the cluster.15. Queue Manager configured in mqs.ini. In Active/Active configurations each server holdsits own copy of the global queue manager configuration file mqs.ini. In order to run theprotected queue manager on all servers in the cluster, the queue manager must be configuredin the mqs.ini configuration file of all servers in the cluster. Copy the appropriateQueueManager: stanza from the primary server and add it to the mqs.ini configuration fileson all backup servers.12 WebSphere MQ Recovery Kit Administration Guide
WebSphere MQ Configuration ConsiderationsSupported File System LayoutsDepending on your shared storage system and the file system layout there are three differentsupported configurations. They differ in the file system layout. The following section describesthe supported file system layouts.Configuration 1 – /var/mqm on shared storageIn this configuration the whole /var/mqm directory is mounted on LifeKeeper supported sharedstorage (SCSI, SAN, NAS, LKDR and DRBD).Note: This only works for Active/Passive configurations.Figure 3 File system layout 1 - /var/mqm on shared storageLifeKeeper for Linux 13
Page 1 and 2: LifeKeeper ® for LinuxWebSphere MQ
Page 3 and 4: Table of ContentsIntroduction .....
Page 5 and 6: WebSphere MQ Recovery KitAdministra
Page 7 and 8: IntroductionAbbreviationsThe follow
Page 9 and 10: RequirementsRecovery Kit Installati
Page 11 and 12: WebSphere MQ Recovery Kit OverviewF
Page 13: WebSphere MQ Configuration Consider
Page 17 and 18: WebSphere MQ Configuration Consider
Page 19 and 20: Configuring WebSphere MQ for Use wi
Page 21 and 22: Configuring WebSphere MQ for Use wi
Page 23 and 24: Configuration Changes After Resourc
Page 25 and 26: WebSphere MQ Configuration Examples
Page 33 and 34: LifeKeeper Configuration TasksLifeK
Page 35 and 36: LifeKeeper Configuration TasksChann
Page 37 and 38: LifeKeeper Configuration TasksUnext
Page 39 and 40: LifeKeeper Configuration Tasks6. On
Page 41 and 42: LifeKeeper Configuration Tasksa. No
Page 43 and 44: LifeKeeper Configuration TasksThe p
Page 45 and 46: LifeKeeper Configuration TasksLifeK
Page 47 and 48: LifeKeeper Configuration TasksSever
Page 49 and 50: LifeKeeper Configuration TasksChang
Page 57 and 58: WebSphere MQ TroubleshootingWebSphe
Page 59 and 60: WebSphere MQ Troubleshootingnot exi
Page 61 and 62: WebSphere MQ Troubleshooting119039
Page 63 and 64: 119004 Some orphans of queue manage
Page 65 and 66:
WebSphere MQ Troubleshooting119209
Page 67 and 68:
Appendix B - Sample qm.ini Configur
show all

WebSphere MQ Resources

Create successful ePaper yourself

Delete template?

Save as template?