WebSphere MQ Resources

LifeKeeper Configuration TasksMQS_LISTENER_CHECK_DELAY 2 (seconds) The time in seconds betweenthe start of the listener andthe check for the successfullistener start. The default of2 seconds should besufficient to detect port inuse conditions.NO_AUTO_STORAGE_DEPS 0 If you set the variable to 1the recovery kit does notcheck if the queue managerand log directory are locatedin shared storage. If set to 1the recovery kit does notcreate file system hierarchiesupon resource configurationtoo.MQS_DSPMQVER_TIMEOUT 5 (seconds) Timeout for the dspmqvercommand (needed to findout the version ofWebSphere MQ), must be atleast 2 seconds.MQS_SKIP_CRT_MISSING_Q 0 Set to 1 to not automaticallycreate a missing test queue.To change the parameters add the appropriate variable in the table above to/etc/default/LifeKeeper. The line should have the following syntax:[...]MQS_CHECK_TIMEOUT_ACTION=sendevent[...]To disable a custom setting and fall back to the default value, just remove the line from/etc/default/LifeKeeper or comment out the corresponding line.54 WebSphere MQ Recovery Kit Administration Guide