Integrator/CP User Guide - ARM Information Center
Integrator/CP User Guide - ARM Information Center
Integrator/CP User Guide - ARM Information Center
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Getting Started• UART A/B Interface, requires a three-wire null modem cable• LEDs• GPIO, requires a special loopback cable• Keyboard, use either keyboard or loopback cable• Mouse, use either mouse or loopback cable• CLCD Bias, requires a voltmeter.The source code for the tests are ininstall\Platforms\<strong>CP</strong>\platform\software\selftest\.The selftest.mcp project file is ininstall\Platforms\<strong>CP</strong>\platform\software\selftest\build\ads1.2\.Generic <strong>Integrator</strong> platform support files are ininstall\Platforms\<strong>CP</strong>\platform\software\selftest\<strong>Integrator</strong>_Library\.The <strong>Integrator</strong> library project must have been built before the test suite is built. There isa prebuilt image on the CD. Details on constructing special loopback cables is providedon the CD.2.5.4 PrimeCell SoftwareIncluded in the install\Platforms\<strong>CP</strong>\PrimeCell_drivers directory are genericPrimeCell driver source files and the test harness project file primecell.mcp is ininstall\Platforms\<strong>CP</strong>\PrimeCell_drivers\build\ads1.2\.The <strong>Integrator</strong>/<strong>CP</strong> specific configuration files applatfm.h and apintcfg.h are ininstall\Platforms\<strong>CP</strong>\PrimeCell_drivers\apos\. The test instantiates the PrimeCelldrivers and performs top level functionality tests. A MultiMedia Card (flash memorycard) is required to complete all tests. PrimeCell drivers are provided for inclusion intotarget application software.NoteSome MultiMedia cards do not support whole card erase, so this test might also fail.<strong>ARM</strong> DUI 0159B Copyright © 2002 <strong>ARM</strong> Limited. All rights reserved. 2-11
Change language