Integrator/CP User Guide - ARM Information Center

System Architecture3.9 Register overviewThis section gives a overview of the register map for the entire Integrator/CP baseboardand core module system.NoteThe core module registers are included for information only. Refer to the documentationsupplied with your core module for details on core module register addresses.3.9.1 Register overviewTable 3-10 shows the map for an Integrator/CP baseboard and core module system.Peripheral Address range Size SeeTable 3-10 System control register mapCore Module control registers 0x10000000–0x1000003F 64bytes The documentation provided with yourcore moduleCore Module interrupt controller 0x10000040–0x1000007F 64bytes Core module documentationReserved 0x10000080–0x100000FF 128bytes Core module documentationSerial Presence Detect memory 0x10000100–0x100001FF 256bytes Core module documentationCounter/timers 0x13000000–0x13FFFFFF 16MB Counter/timer interface on page 4-42Primary interrupt controllerregisters0x14000000–0x14FFFFFF 16MB Core module documentationReal-time clock 0x15000000–0x15FFFFFF 16MB Core module documentationUART0 0x16000000–0x16FFFFFF 16MB UART interface on page 4-37UART1 0x17000000–0x17FFFFFF 16MBKeyboard 0x18000000–0x18FFFFFF 16MB Keyboard and mouse interface onpage 4-33Mouse 0x19000000–0x19FFFFFF 16MBDebug LEDs and DIP switch 0x1A000000–0x1AFFFFFF 16MB CP control registers on page 3-26Reserved 0x1B000000–0x1BFFFFFF 16MB Core module documentationMultimedia Card Interface 0x1C000000–0x1CFFFFFF 16MB MMC interface on page 4-27Advanced Audio CODEC Interface 0x1D000000–0x1DFFFFFF 16MB Audio interface on page 4-20ARM DUI 0159B Copyright © 2002 ARM Limited. All rights reserved. 3-25