M16C User Manual.pdf

Timer A1 countercontent (hex)Timer A0 countercontent (hex)Timer A ApplicationsMitsubishi microcomputersM16C / 62 GroupSINGLE-CHIP 16-BIT CMOS MICROCOMPUTERl = reload register contentFFFF16(1) Count enabled(2) Timer A0 start count(3) Timer A0 stop countl000116n = reload register contentTimeFFFF16n(4) Timer A1 start count(5) Timer A1 stop countTimer A0 countstart flagTimer A1 countstart flag000116“1”“0”“1”“0”Set to “1” by softwareSet to “1” by softwareTimeInput signal fromTA0IN pin“H”“L” 1ms 50µsPWM pulse outputfrom TA1OUT pinTimer A0 interruptrequest bitTimer A1 interruptrequest bit“H”“L”“1”“0”“1”“0”Cleared to “0” when interrupt request is accepted, or cleared by softwareCleared to “0” when interrupt request is accepted, or cleared by softwareFigure 3.3.1. Operation timing of delayed one-shot outputTA0IN pin inputf1f8f32Timer A0Used for one-shot timer modeTimer A0 interrupt request bitfC32Timer A1Timer A1 interrupt request bitUsed for one-shot timer modeFigure 3.3.2. Connection diagram of delayed one-shot output465