M16C User Manual.pdf

Mitsubishi microcomputersM16C / 62 GroupSINGLE-CHIP 16-BIT CMOS MICROCOMPUTERVersionContents for changeRevisiondateREV.C2 Page 404, 2.7.10 Precautions for A-D Converter00.7.10(5) If using the A-D converter with Vcc = 2.7V to 4.0 V:Use without fAD (no frequency division) for-->Use only a divided frequency for fAD (undivided fAD is not allowed).REV.C3 Page 35, Table 1.12.201.2.16_______Expansion mode 1, microprocessor mode, PM13=1, CS0 area0600016 to BFFFF16 --->0600016 to FFFFF16AD.Page 414, 2.8.1 Overview(3) Output from the D-A converter and the direction registerTo use the D-A converter, set the direction register of the relevant port tooutput.-->To use the D-A converter, do not set the direction register of the relevantport to output.REV.C4 Page 31001.6.42.2.15 Precautions for Timer A (one-shot timer mode) (3) is partly revised.Page 3252.3.7 Precautions for Timer B (pulse period/pulse width measurement mode)(3) is partly revised.Page 334, 338, 342Table 2.4.1 to Table 2.4.3 are partly revised. Note 1 is partly revised.Page 362Operation (3) is partly revised.Page 370Operation (3) is partly revised.Page 413Table 2.7.14 and Table 2.7.15 are partly revised.Revision historyM16C/62 User's Manual605