Download - Fuji Xerox Printers

MessageRemove & ShakeX CrtrdgXXX=Yellow, Magenta, Cyan, orBlackCondition/Reason/ActionThis message is displayed when the color printed with the X toner cartridge becomespale. Remove the X toner cartridge, and lightly shake it 5 to 6 times to even the toner.Then, set the X toner cartridge at its original position.Important• Do not remove the toner cartridge except when required.When removing the toner cartridge, the toner may scatter.Refer to• "Replacing the Toner Cartridges" (P. 128)Remove PHD UnitTapes MismatchRibbons remain in the drum cartridge. Remove the yellow ribbons from the drumcartridge.Refer to• "Replacing the Drum Cartridge" (P. 130)Replace PHD UnitIt is time to replace the drum cartridge.Replace the drum cartridge with a new one.Refer to• "Consumables" (P. 182)• "Life of Consumables" (P. 183)• "Replacing the Drum Cartridge" (P. 130)Replace XXXCrtrdgXXX=Yellow, Magenta, Cyan, orBlack13_Replace XXXCrtrdgCheck Toner CartYYYCheck Toner CartReplacement TimeXXX=Yellow, Magenta, Cyan,or BlackYYY=Fuser Unit, Drum Cartridge,belt unitSet Fuserin PlaceThen RebootPrinterXXX CrtrdgMismatchXXX=Yellow, Magenta, Cyan, orBlackThe X toner cartridge has run out of toner.Replace the displayed toner cartridge with a new one.Refer to• "Life of Consumables" (P. 183)• "Replacing the Toner Cartridges" (P. 128)This message is displayed when the following two conditions are met.1. The black toner cartridge is empty or the waste toner fills up the drum cartridge.2. The fuser unit, the belt unit, or the drum cartridge reaches its life.Replace the XXX toner cartridge and the YYY unit.If the belt unit is displayed for YYY, call our Customer Support Center or your dealer.Refer to• "Replacing the Toner Cartridges" (P. 128)• "Replacing the Fuser Unit" (P. 134)• "Replacing the Drum Cartridge" (P. 130)• "Consumables" (P. 182)The fuser unit is not installed correctly. Open the front cover and re-install the fuserunit. After installing the unit, turn on the printer.Refer to• "Replacing the Fuser Unit" (P. 134)X is not a toner cartridge suitable for the printer.Correctly set a suitable toner cartridge in the printer.Refer to• "Consumables" (P. 182)• "Replacing the Toner Cartridges" (P. 128)6.6 Error Messages (In Alphabetical Order) 119