Download - Fuji Xerox Printers

More documents

Recommendations

Info

8. Press the button to confirmyour selection.Paper TypeHW *9. Press the button to return to theprint screen.Setting the Paper SizeRefer to• "Supported Paper" (P. 71)For the paper tray, [Paper Size] is set to [Auto] as default. When using the custom sizedpaper for the paper tray, specify the length (Y) and width (X) under [Tray Settings] > [Tray1] or [Tray 2] > [Paper Size] > [Custom Size].For the Manual Feeder, use the following procedure when setting the paper size.1. Press the button on the controlpanel to display the menu screen.MenuReport / List2. Press the < > button until [Tray Settings]is displayed.MenuTray Settings3. Press the < > or button toaccept the selection.[Tray 1] is displayed.Tray SettingsTray 14. Press the < > or button toaccept the selection.[Paper Type] is displayed.Tray 1Paper Type5. Press the < > button until [Paper Size] isdisplayed.Tray 1Paper Size6. Press the < > or button toaccept the selection.The current settings is displayed.Paper SizeA4 *7. Press the < > button until the correctpaper size and orientation are displayed forthe loaded paper.(Example: A5)8. Press the button to confirmyour selection.Note• When using custom size paper, select [Custom Size]and specify the length (Y) and width (X).Paper SizeA5Paper SizeA5 *9. Press the button to return to theprint screen.80 4 Paper
Setting the Paper Size and Type in the Popup MenuOn the printer, [Display Screen] is preset to [On]. With this setting, the printer displays aprompt message to set the paper size and type every time you load paper in the paper tray.Follow the procedure described below to specify the paper size and paper type in the PopupMenu on the control panel.1. Load paper in Tray 1 or Tray 2.A dialog box appears on the control panel for specifying the paper size.2. Select the paper size with the < > or < > button, and then press the button.A dialog box appears for specifying the paper type.3. Select the paper type with the < > or < > button, and then press the button.Setup is complete.If you do not want to specify the paper size and paper type every time you load paper in thetrays, select [Display Screen] to [Off]. For information on how to specify the setting, refer to" Tray 1 and Tray 2" (P. 101).For information on how to individually specify the paper size and paper type for Tray 1 andTray 2, refer to " Setting the Paper Type and Size with the Control Panel" (P. 79).Extending the Output Tray ExtensionThe output tray extension prevents printed outputfrom falling off the printer.When printing documents, extend the output trayextension.4.2 Loading Paper 81
Page 2 and 3:
Adobe, the Adobe logo, Acrobat, Acr
Page 4:
DocuPrint C2120 Features• Easy-to
Page 8 and 9:
ManualsManuals included with the pr
Page 10 and 11:
4. Orientation of paper is describe
Page 12:
Electrical SafetyThis product shall
Page 16 and 17:
Warning and Caution LabelsBe sure t
Page 18 and 19:
About LicenceThis product includes
Page 20 and 21:
1 Printer Environment SettingsThis
Page 23 and 24:
Example of the [Printer Settings] l
Page 26 and 27:
Obtaining an IP Address in IPv6The
Page 28 and 29:
1. Press the button on the control
Page 30 and 31: • Setting up your Web Browser wit
Page 32 and 33: Using CentreWare Internet ServicesF
Page 34 and 35: 2 Basic OperationThis chapter descr
Page 36 and 37: InteriorNo. Name Description1 Fuser
Page 38 and 39: Control Panel DisplayThere are two
Page 40 and 41: 2.3 About the Ground Fault Interrup
Page 42 and 43: 2.5 Cancelling and Checking a Print
Page 44 and 45: Print Options in the Properties Dia
Page 46 and 47: The following procedure explains ho
Page 48 and 49: 3.3 Printing on Non-standard Size P
Page 50 and 51: Printing on Non-standard Size Paper
Page 52 and 53: 3.4 Printing Confidential Documents
Page 54 and 55: Operations on the Control PanelFoll
Page 56 and 57: 3.5 Printing After Checking the Pri
Page 58 and 59: Operations on the Control PanelFoll
Page 60 and 61: 3.6 Printing PDF Files DirectlySome
Page 62 and 63: 3.7 Printing XPS FilesThis printer
Page 64 and 65: 3.8 Printing Using E-mail - E-mail
Page 66 and 67: Sending E-mailsSupported E-mail Att
Page 68 and 69: • To Specify Commands in the Subj
Page 70 and 71: 3.9 AuditronAuditron contains an au
Page 72 and 73: Paper Tray Paper Size Paper Type (G
Page 74 and 75: Unsupported PaperDo not use the fol
Page 76 and 77: 4.2 Loading PaperLoading Paper in a
Page 78 and 79: Important:•Insert the paper strai
Page 82 and 83: 5 Control Panel MenusThis chapter d
Page 84 and 85: Changing the SettingsBasic Procedur
Page 86 and 87: 5.2 Description of Menu ItemsThis s
Page 88 and 89: ItemDescriptionTCP/IPSpecifies the
Page 90 and 91: ItemAdobe ProtocolDescriptionSets t
Page 92 and 93: ItemFault Time-outJob Time-outAuto
Page 94 and 95: ItemDefaultPaperSizeOdd Page 2Sided
Page 96 and 97: ItemPHD Unit RefreshPrint MeterInit
Page 98 and 99: ItemDescription2 Sided Specifies 2
Page 100 and 101: Panel SettingsSpecifies whether to
Page 102 and 103: 6 TroubleshootingThis section provi
Page 104 and 105: 5. Grasp the green part of the belt
Page 106 and 107: 7. Insert the tray into the printer
Page 108 and 109: 5. Raise the transfer belt unit unt
Page 110 and 111: 6.2 Hardware Problems (Power Loss,A
Page 112 and 113: 6.4 Print Quality ProblemsSymptomOu
Page 114 and 115: SymptomOutput is partially blank.Ve
Page 116 and 117: SymptomPhotos are blurred.Cause/Rem
Page 118 and 119: 6.6 Error Messages (In Alphabetical
Page 120 and 121: MessageCondition/Reason/ActionXXX C
Page 122 and 123: Reload ManualFeederMessageCondition
Page 124 and 125: SymptomThe [Refresh] button does no
Page 126 and 127: IPv6 Connection ProblemsIPv6 Connec
Page 128 and 129: 7 MaintenanceThis chapter describes
Page 130 and 131:
5. Insert the toner cartridge into
Page 132 and 133:
6. Open the bag containing the new
Page 134 and 135:
Replacing the Fuser UnitThis sectio
Page 136 and 137:
11. Close the front cover.Important
Page 138 and 139:
5. Insert the protrusion at the bot
Page 140 and 141:
Printing a Report/ListThe reports/l
Page 142 and 143:
Checking the Meter Reading by Compu
Page 144 and 145:
7.5 Monitoring and Managing the Pri
Page 146 and 147:
Setting StatusMessengerTo use Statu
Page 148 and 149:
7.7 Security FeaturesThis section e
Page 150 and 151:
6. On the displayed page, select th
Page 152 and 153:
Enabling Data EncryptionTo encrypt
Page 154 and 155:
2. To reject printing from a specif
Page 156 and 157:
7. For [IPSec SA Life Time], specif
Page 158 and 159:
Important• The settings you have
Page 160 and 161:
Auditron AdministrationWhen the Aut
Page 162 and 163:
8. Verify that [User Account] is di
Page 164 and 165:
Registering the Login Information o
Page 166 and 167:
Determining the Adjustment ValuesTh
Page 168 and 169:
12. After entering the values, pres
Page 170 and 171:
7.11 Adjusting the Fuser Unit Tempe
Page 172 and 173:
7.13 Cleaning the PrinterThis secti
Page 174 and 175:
5. Return the belt unit to its orig
Page 176 and 177:
4. Pull out the paper tray from the
Page 178 and 179:
ItemDescriptionPaper sizeManual Fee
Page 180 and 181:
ItemDescriptionWeightUsage environm
Page 182 and 183:
ConsumablesThis section explains ho
Page 184 and 185:
A.4 Obtaining the Product Informati
Page 186 and 187:
2. Loosen the screw on the control
Page 188 and 189:
Changing the Accessory Configuratio
Page 190 and 191:
• You may not be able to execute
Page 192 and 193:
DNS:An acronym for Domain Name Syst
Page 194 and 195:
Port9100:A network communication me
Page 196 and 197:
Index< > < > < > < > buttons . . .
Page 198 and 199:
printing XPS files. . . . . . . . .
Page 200 and 201:
Conventions for the Administrator M
Page 202 and 203:
CSystem SettingsLow Power Timer2 Mi
Page 204 and 205:
FPCLPaper TrayAuto*, Tray 1, Manual
Page 206:
DocuPrint C2120 User GuideFuji Xero
show all

Download - Fuji Xerox Printers

Create successful ePaper yourself

Delete template?

Save as template?