Download - Fuji Xerox Printers

Controlling Data Reception by IP AddressWhen the printer uses an LPD port or Port9100 port, the printer can deny or accept datafrom certain IP addresses. Follow the procedure described below to set this feature usingCentreWare Internet Services.Before configuring the setting, disable the print ports other than the LPD port or Port9100port.Note• To set this feature on the control panel, refer to "IP Filter" (P. 89).• This feature can be used only when the printer uses LPD or Port9100.1. Launch your web browser and access CentreWare Internet Services.Note• For information on how to access CentreWare Internet Services, refer to "Configuring the Printer UsingCentreWare Internet Services" (P. 29).2. Click the [Properties] tab.3. From the menu on the left, click [Protocol Settings] and then [LPD] or [Port 9100].4. Click [Edit] for [IP Filter].5. Enter the IP addresses/address masks you want to control access from and select thetype of access ([Reject], [Permit], or [Off]). The IP addresses/address masks shouldbe series of four numbers between 0 and 255. The current value is indicated with anasterisk (*).6. When you are finished with the setting, click the [Apply] button located at the bottom ofthe right frame and reboot the printer.Note• If you do not want to apply your new settings and want to keep your original values, click [Undo].• When you are prompted to enter the administrator's ID and password, enter the ID and password andclick [OK].• Examples of IP Filter SettingYou can set a maximum of five IP addresses/address masks, and the first pair will have apriority. If entering multiple addresses, enter the address that covers the smallest area first.1. To permit printing from a specific user:Example:Permit printing from "192.168.100.10"7.7 Security Features 153