Download - Fuji Xerox Printers

Sending E-mailsSupported E-mail AttachmentsFiles of the following format can be attached to e-mails:• PDF filesTo Send E-mailsTo perform E-mail Print, enter the printer's address in the "To:" field on your e-mailapplication.Then, enter the following commands in the subject field or in the body message and enterthe text or attach the PDF file you want to print.Note• The method of sending e-mails varies depending on the application being used. Refer to the manual thatcame with your e-mail application.• Set the e-mail format to "Text" instead of "HTML". This feature does not support "HTML" format.• To print the body messages of e-mails, enter the text in ASCII code.• To Specify Commands in the Body MessageThe following commands can be specified in the body message.The subject can be whatever you like.Command Parameter Description#Password Password When [Password for Print Job] is set, make sure to start youre-mail with this command. When the password is not set,you do not need to enter this command.#Print (None) This command prints the text entered after the "#Print".When a PDF file is attached to your e-mail, this commandalso prints the PDF file.ExampleFollow these guidelines when entering commands in e-mails.• Commands are not case sensitive.• If [Password for Print Job] is set, start your e-mail with "#Password".• Prefix each command with "#". Any command that does not start with "#" will be ignored.• Place only one command per line and separate each command or parameter with aspace or a tab.• When the same command is entered more than once in one e-mail, only the first one willbe valid and the rest will be ignored.66 3 Print