21.07.2015 Views

Download - Fuji Xerox Printers

Download - Fuji Xerox Printers

Download - Fuji Xerox Printers

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Replacing the Fuser UnitThis section describes procedures for replacing the Fuser Unit.Caution on Handling the Fuser UnitWhen handling the Fuser Unit, take note of the following points:CAUTION• Fuser SafetyWhen removing the Fuser Unit, always switch off first and wait for 40 minutes until itcools off.• Always turn off the printer and disconnect the power cable from the grounded outletbefore cleaning the printer or performing maintenance. It can cause electric shock.• Avoid bright light and try to finish the replacement within 3 minutes.Replacing the Fuser UnitImportant• Turn off the printer and wait 40 minutes before removing the Fuser Unit.1. Turn off the printer and disconnect thepower cord. Wait 40 minutes until it cools.2. Remove any paper in the output tray.3. Press the cover button on the right side ofthe printer and open the front cover.4. Grasp the green parts of the belt unit withyour fingers and lower the belt unit until itstops.134 7 Maintenance

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!