Download - Fuji Xerox Printers

Setting the Paper Type and Size with the Control PanelWhen loading paper in Tray 1 or Tray 2 (optional), you must set the paper type and size withthe control panel.When loading paper in the Manual Feeder, select the paper type and size in the print driverto print.Follow the procedure described below to specify the paper type and size from the menuscreen displayed on the control panel.Note• The message to set the paper size and type is displayed on the control panel every time you load paperinto each tray. Refer to "5.1 Overview of the Menus" (P. 82) for details.Setting the Paper TypeImportant• Paper type settings must match those of the actual paper loaded in the trays. Otherwise, image qualitycan not be processed accurately. Toner may not fuse properly on the paper, resulting in dirty and poorquality prints.Refer to• "Supported Paper" (P. 71)Use the following procedure when setting the paper type.1. Press the button on the controlpanel to display the menu screen.MenuReport / List2. Press the < > button until [Tray Settings]is displayed.MenuTray Settings3. Press the < > or button toaccept the selection.[Tray 1] is displayed.Tray SettingsTray 14. Press the < > button to select a papertray.(Example: Tray 1)Tray SettingsTray 15. Press the < > or button toaccept the selection.[Paper Type] is displayed.Tray 1Paper Type6. Press the < > or button toaccept the selection.The current setting is displayed.Paper TypePlain *7. Press the < > button until the correctpaper type is displayed for the loadedpaper.(Example: Heavyweight 1)Paper TypeHW4.2 Loading Paper 79