Download - Fuji Xerox Printers

Electrical SafetyThis product shall be operated by thepower source as indicated on the product'sdata plate. Consult your local powercompany to check if your power sourcemeets the requirements.Connect this product toa protective earth circuit.This product is supplied with a plug that hasa protective earth pin. The plug fits only intoan earthed electrical outlet. This is a safetyfeature. If the plug doesn't fit to the outlet,contact an electrician to replace the outletto avoid risk of electric shock. Never use anearthed adapter plug to connect theproduct to the electrical outlet that has noearth connection terminal.Improper connection of a groundingconductor may cause electric shock.Plug the power cord directly into agrounded electrical outlet. To preventoverheat and a fire accident, do not use anextension cord, a multi-plug adaptor or amultiple connector. Consult your local FujiXerox representative to check if an outlet isgrounded.Connect this product to a branch circuit oran outlet that has larger capacity than therated ampere and voltage of this product.See the data plate on the rear panel of thisproduct for its rated ampere and voltage.Never touch the power cord with wethands. It may cause electric shock.Do not place an object on the power cord.Always keep the plug connection free ofdust. The dusty and damp environmentmay bring about minute electric current in aconnector. It may generate heat andeventually cause a fire accident.Do not damage or alter the power cord.Damage and alteration may generate heatand eventually cause electric shock or afire accident.If the power cord is damaged or insulatedwires are exposed, contact your local FujiXerox representative for its replacement.Do not use a damaged or uninsulated cordto avoid the risk of electric shock and a fireaccident.When cleaning this product, always switchoff and unplug it. Access to a live machineinterior may cause electric shock.Do not unplug or re-plug this product withthe switch on. Plugging and unplugging alive connector may deform the plug andgenerate heat, and eventually cause a fireaccident.Hold the plug not the cord when unpluggingthis product, or it may damage the cord andcause electric shock or a fire accident.Always switch off and unplug the machinewhen it is not used over weekends or longholidays. It may cause deterioration ofinsulations and eventually electric shock ora fire accident.Once a month, switch off this product andcheck if• the power cord is plugged firmly into anelectrical outlet;• the plug is not excessively heated,rusted or bent;• the plug and electrical outlet are free ofdust; and• the power cord is not cracked or worndown.Once you notice any unusual condition,switch off and unplug this product first andcontact your local Fuji Xeroxrepresentative.To avoid the risk of electric shock and a fireaccident, only use the power cord suppliedwith this product or the ones designated byFuji Xerox.The power cord is exclusive use for thisproduct. Do not use it for any other product.12 Safety Notes