Download - Fuji Xerox Printers

Sending an E-mail to Check the Printer StatusFollow these guidelines when sending an e-mail to the printer.• Use the e-mail application on your computer and enter the printer's e-mail address in the"To:" field.• The subject can be whatever you like.• Enter the following commands observing the rules described below.Note• The method of sending e-mails varies depending on the application being used. Refer to the manual thatcame with your e-mail application.• Supported CommandsCommand Parameter Description#Password Password When [StatusMessenger Password] is set, make sure tostart your e-mail with this command. When the passwordis not set, you do not need to enter this command.#NetworkInfo - Specify this command when you want to obtain thenetwork setting information.#Status - Specify this command when you want to obtain theprinter's status.• Command Entry RulesFollow these guidelines when entering commands in e-mails.• Commands are not case sensitive.• If [StatusMessenger Password] is set, start your e-mail with "#Password".• Prefix each command with "#". Any command that does not start with "#" will be ignored.• Place only one command per line and separate each command or parameter with a spaceor a tab.• When the same command is entered more than once in one e-mail, only the first one willbe valid and the rest will be ignored.• Example1. If you want to obtain the printer's status when [StatusMessenger Password] is not set,enter:#Status2. If you want to obtain the printer's status and network setting information when[StatusMessenger Password] is set to "ronly", enter:#Password#Status#NetworkInforonly7.6 Checking the Printer Status via E-mail 147