Download - Fuji Xerox Printers

E-mail Environment (Printer)Set the following items under the [Properties] tab on CentreWare Internet Services.Note• After changing the settings on CentreWare Internet Services, make sure to click the [Apply] button andreboot the printer.• For information about each item, refer to the online help of CentreWare Internet Services.Item Setting Item DescriptionPort Status E-mail Print Select [Enabled].Protocol Settings> E-mailMachine's E-mailAddressSMTP ServerAddressSMTP Server PortNumberE-mail SendAuthenticationLogin NamePasswordRe-enter PasswordPOP3 Server AddressPOP3 Server PortNumberLogin NamePasswordPOP3 Server CheckIntervalAPOP SettingsPermitted E-mailAddressStatusMessangerPassword/Print Job PasswordSet the printer's e-mail address. This address will appearas "From:" on e-mails sent from the printer.Set the IP address of the outgoing e-mail server to beconnected via SMTP protocol or the FQDN (FullyQualified Domain Name).Set the port number used on the SMTP server.Set the authentication method to be used on the SMTPserver.Set the login user name for the SMTP server.Set the login password for the SMTP server.Re-enter the login password for verification.Set the IP address of the incoming e-mail server to beconnected via POP3 protocol or the FQDN (FullyQualified Domain Name).Set the port number used on the POP3 server.Set the login user name for the POP3 server.Set the login password for the POP3 server.Set the intervals to check for new e-mails on the POP3server.Select [Enabled] if the POP3 server supports APOP.If controlling e-mail reception, set the e-mail addressesof users who are permitted to send e-mails to the printer.If you do not specify addresses, the printer will accept e-mails from all users.When using a password to restrict printing of e-mailssent to the printer, enter the password for[StatusMessenger Password] and [Password for PrintJob].3.8 Printing Using E-mail - E-mail Print - 65