Download - Fuji Xerox Printers

6. Open the bag containing the new DrumCartridge.7. Remove the new Drum Cartridge from thebag.8. Slowly remove the eight yellow ribbonsprojecting from the side of the DrumCartridge.Important• Pull the ribbons straight out. If you remove the ribbonsat an angle, they may break.Note• The length of four of the ribbons differs from the lengthof the other four ribbons.9. While holding the top of the rear protectivecover, remove the cover from the DrumCartridge.Important• Remove the front protective cover from the DrumCartridge after installing the Drum Cartridge in theprinter. Do not remove it yet.10. While holding the gray sections of the DrumCartridge, align the Drum Cartridge with thegrooves of the printer, and insert the DrumCartridge. Press the Drum Cartridgesecurely into place, and confirm that thelines of the Drum Cartridge are aligned withthe lines of the printer.132 7 Maintenance