Download - Fuji Xerox Printers

7.13 Cleaning the PrinterThis section explains how to clean the printer to keep it in good condition and to ensureoptimum print quality.WARNING• When cleaning this product, use the designated cleaning materials exclusive to it. Othercleaning materials may result in poor performance of the product. Never use aerosolcleaners, or it may catch fire and cause explosion.CAUTION• When cleaning this product, always switch off and unplug it. Access to a live machineinterior may cause electric shock.Cleaning the ExteriorClean the exterior of the printer monthly or more often if needed. To clean the exteriorsurfaces, wipe them with a soft, firmly wrung cloth moistened with water. Then, wipe off anyexcess water with a soft dry cloth. If dirt or smudges do not come off easily, gently wipe themoff with a soft, firmly wrung cloth moistened with a small amount of neutral cleaner.Important• Do not spray cleaning agents directly on the printer. The fluid may seep through the cracks and causeproblems. Do not use cleaning agents other than neutral cleaners.Cleaning the InteriorAfter clearing paper jams or replacing toner cartridges, inspect the inside of the printerbefore closing the printer covers.Important• Never touch a labelled area found on or near the heat roller. You can get burnt. If a sheet of paper iswrapped around the heat roller, do not try to remove it by yourself. Doing so can cause injuries or burns.Turn off the printer immediately, and contact our Customer Support Center or your dealers.• Remove any remaining pieces of paper.• Remove any dust or stains with a dry clean cloth.172 7 Maintenance