Download - Fuji Xerox Printers

3.5 Printing After Checking the Print Result- Sample Print -If your printer has the additional memory (optional) installed, you can use Sample Print.Important• As data is stored in the RAM disk, the data is erased when the printer is turned off.Sample PrintSample Print allows you to store the print data of multiple copies in the memory, print outonly the first set to check the print result and if satisfactory, print the remaining copies fromthe control panel.1 set is printedIf the print resultis OKPrint the rest of the setsfrom theSenddataStoredIf the print result is notOKCancel the job on thecontrol panelNote• To delete a Sample Print job without printing, refer to "Operations on the Control Panel" (P. 58).• To use Sample Print with the RAM disk, configure the following settings:- Set [RAM Disk] to [Available] on the [Options] tab in the properties dialog box that is displayed byclicking the printer icon. For details, refer to "Changing the Accessory Configuration on the Print Driver"(P. 188).- Set [Admin Menu] > [System Settings] > [RAM Disk] to other than [Off] on the control panel.Printing Using the Sample Print FeatureFollow the procedure described below to sample print a job.To sample print a job, configure the following settings on your computer and send the jobto the printer. Then, operate the control panel to manually start printing.Operations on Your ComputerThe following procedure uses Windows XP WordPad as an example.Note• The method of displaying the properties dialog box varies depending on the application being used.Refer to the manual that came with your application.1. On the [File] menu, click [Print].2. Select the printer from the [Select Printer] list box, and then click [Preferences].56 3 Print