Download - Fuji Xerox Printers

ItemDescription2 Sided Specifies 2 sided printing settings.For 2 sided printing, the optional Duplex Unit is necessary.• [2 Sided Print]Specifies whether to perform 2 sided printing. The default is [Off].• [Binding Edge]Specifies the binding direction from [Long Edge Flip] or [Short Edge Flip].The default is [Long Edge Flip].FontSymbol SetFont SizeFont PitchForm LinesQuantityImage EnhanceHexDumpDraft ModeLine TerminationOutput ColorSets the font to be used when printing. (default: [Courier])Sets the font for symbols. (default: [Roman-8])Sets the font size. You can specify the value in increments of 0.25 pt.• [4.00] to [50.00] (default: [12.00])Sets the font pitch (number of characters per inch). You can specify the valuein increments of 0.01 cpi.• [6.00] to [24.00] (default: [10.00])Sets the form line (number of lines per form). You can specify the value inincrements of 1.• [5] to [128] (default: [64])Sets the number of sets to be printed. You can specify the value in incrementsof 1.• [1] to [999] (default: [1])Sets whether to perform image enhancement.Image enhancement is a feature that makes the boundary line between blackand white smoother to decrease jags and enhance the visual appearance.• [On] (default)• [Off]Sets whether to print the data sent from a computer in ASCII codescorresponding to the hexadecimal notation format in order to check the datacontents.• [Disable] (default)• [Enable]Sets whether to print in the draft mode. This mode increases print speed butdecreases print quality.• [Disable] (default)• [Enable]Sets the line termination control codes. Set how you want the printer tointerpret CR, LF and FF control codes.• [Off] (default)The line termination command is not added.CR=CR, LF=LF, FF=FF• [Add-LF]The LF command is added.CR=CR+LF, LF=LF, FF=FF• [Add-CR]The CR command is added.CR=CR, LF=CR+LF, FF=CR+FF• [CR-XX]The CR and LF commands are added.CR=CR+LF, LF=CR+LF, FF=CR+FFSets the color mode. This settings is used when the color printing modesetting is not specified for the print job that is sent to the printer.• [Black and White] (default)Prints in the black and white mode.• [Color]Prints in the color mode.98 5 Control Panel Menus