Download - Fuji Xerox Printers

6.8 Non-genuine ModeWhen toner within a toner cartridge is empty, the [Replace XXX Crtrdg] (XXX: Yellow,Magenta, Cyan, or Black) message appears.When you want to use the printer in Non-genuine mode, use the following procedure toprogram the mode and replace the toner cartridge.Important• If you use the printer in the Non-genuine mode, the performance of the printer may degrade. Anyproblems that may arise from the use of the Non-genuine mode are not covered by our qualityguarantee. Continuous use of the Non-genuine mode can also cause the printer to break down, and anyrepair charges for such break down will be borne by the owner.Note• To disable the Non-genuine mode, select [Off] in Step 4.1. Press the < > and buttonssimultaneously on the control panel.[Consumables Menu] is displayed.Consumables MenuNon-genuine2. Press the < > or button.[Toner] is displayed.Non-genuineToner3. Press the < > or button again.The current setting is displayed.TonerOff *4. Press the < > button to display [On].Then, press the button toconfirm the selection.TonerOn *5. Press the button.The printer switches to the Non-genuinemode.Ready to PrintNon-genuineToner6.8 Non-genuine Mode 127