You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
7.10 Adjusting the Image Transfer VoltageWhen you have unsatisfactory printing results, such as white spots on the printed image,having extra toner spilt on the printout, or a bluish printout, adjust the image transfer voltageto solve these printing problems.The image transfer voltage can be adjusted within the range of -6 to 6 in increments of 1 foreach paper type. The default is "0".Use the following procedure to adjust the image transfer voltage.1. Press the button on the controlpanel to display the menu screen.MenuReport / List2. Press the < > button until [Admin Menu] isdisplayed.MenuAdmin Menu3. Press the < > or button toaccept the selection.[Wired Network] is displayed.Admin MenuWired Network4. Press the < > button until [MaintenanceMode] is displayed.Admin MenuMaintenance Mode5. Press the < > or button toaccept the selection.[F/W Version] is displayed.Maintenance ModeF/W Version6. Press the < > button until [Adjust BTR] isdisplayed.Maintenance ModeAdjust BTR7. Press the < > or button toaccept the selection.[Plain] is displayed.Adjust BTRPlain8. Press the < > button until the paper typeyou want to set is displayed.(Example: Recycled)Adjust BTRRecycled9. Press the < > or button toaccept the selection.A screen that allows you to enter the valueis displayed.10. Press the < > or < > button to set thevalue, then press the button.(Example: 1)11. Press the button to return to theprint screen.RecycledRecycled0 *1 *7.10 Adjusting the Image Transfer Voltage 169
Change language