Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
7.14 Moving the PrinterCarry out the following procedure when moving the printer.Important• This product weighs 18.2 Kg. When moving it, always carry it by a team of two or more persons to avoidmishandling or injury.• When lifting this product, firmly grip the recessed areas provided on both sides of the printer. Never lift itby gripping any other areas. It will prevent you from dropping the product and getting back ache orinjuries.• If the 250 Sheet Feeder (optional) has been installed, uninstall it before moving the printer. If these arenot fixed securely to the printer, they may fall to the ground and cause injuries. For details on how touninstall the optional accessories, refer to the each manual that came with each accessory.• The front side of this printer is heavier than the rear. Take note of this difference in weight when movingthe printer.1. Press the power switch of the printer to the< ◦ > position to turn off the power.2. Disconnect the power cord, interface cable,and any other cables.Important• Never touch the power cord with wet hands. It maycause electric shock.• Hold the plug not the cord when unplugging thisproduct, or it may damage the cord and cause electricshock or a fire accident.3. Remove any paper in the output tray andslide the tray extension inside the printer.7.14 Moving the Printer 175
Change language