Download - Fuji Xerox Printers

3.6 Printing PDF Files DirectlySome PDF files can be sent directly to the printer without using a print driver. Printing PDFfiles directly is much easier and faster when compared to printing them using a print driver.Important• If you print a PDF file directly without using a print driver, the date/time, document name on [Job HistoryReport] will be blank. If you print the file with a banner sheet, the date/time and document name will notbe printed on the banner sheet.• PDF BridgePDF Bridge comes standard with the printer. The methods to print PDF files using PDFBridge are as follows:• Using ContentsBridge Utility (software by Fuji Xerox Co., Ltd.)When using ContentsBridge Utility, refer to the manual included on the Driver CD Kit.• Using commands such as lpr and ftpWhen using commands such as lpr and ftp, refer to "Printing PDF Files without UsingContentsBridge Utility" (P. 60).Note• To print using PDF Bridge, the additional memory (optional) may be required.Supported PDF FilesPDF files created on Adobe Acrobat 4, Adobe Acrobat 5 (excluding some of the featuresadded to PDF1.4), or Adobe Acrobat 6 (excluding some of the features added to PDF1.5)can be printed on the printer.Note• Some PDF files cannot be printed directly depending on how they are created. In such case, open thefiles and print them using a print driver.Printing PDF Files without Using ContentsBridge UtilityPDF files can be sent directly to the printer using commands such as lpr and ftp instead ofContentsBridge Utility. When printing using commands, the following [PDF] settings on thecontrol panel become effective.• Quantity• 2 Sided Print• Print Mode• Password• Collated• Output Size• Layout• Output ColorRefer to• "PDF" (P. 96)Note• When printing using lpr command, the print quantity must be set also using lpr command. In such case,the [Quantity] setting on the control panel becomes invalid. If you do not specify the quantity using lprcommand, the printer recognizes the quantity as "1 set".To print PDF files using lpr or ftp command, you must enable the printer's LPD or FTP porton the control panel or CentreWare Internet Services (default: [Enable]).Refer to• "Protocol" (P. 89)60 3 Print